BENNETT Internacional

Product · Inserting tooling

Coil inserting blades

Also called: Inserting lamellas / insertion blades

Replacement and new inserting blades for coil inserting tools, made in Barcelona to your drawing, sample or tool reference. Two blade grades, NSB Plus® and Excellence, let you match slot fill, wire material and blade life.

BENNETT coil inserting blade
Ground tip of a coil inserting blade

Inserting blade

NSB Plus® · Excellence

Polished end of a wedge guide

Wedge guide

Polished wedge path

Working end of a wedge pusher

Wedge pusher

Bennett Premium®

What inserting blades do

Inserting blades form the ring that guides the coil wires into the stator slots during insertion. Their geometry, surface finish and edge condition decide how cleanly the wire enters the slot and how much the enamel is stressed on the way.

Where they are used

  • Upper and lower inserting tools on automatic and semi-automatic coil inserting machines
  • Statomat, Pavesi, Odawara, Risomat, FASP, Industra, Filmec, DMG and BENNETT ISV machines, among others
  • Copper and aluminium round enamelled wire

Specifications

Known specifications
Made toYour drawing, a worn sample, a BENNETT TB code or a tool reference
MaterialEuropean tool steel, hardened and polished in BENNETT's own factory
GradesNSB Plus® and Excellence
TraceabilityTB batch code on each part, registered since 1983
DimensionsSpecific to each stator and tool: number of slots, bore and stack height

Blade dimensions are specific to each stator and tool, so we do not publish a generic size table. Send us your tool reference and we size every blade to it.

Two grades, one decision: cost per stator

GradeFocusBest for
NSB Plus®Higher fill factors, competitive priceA generation of inserting blades for increasingly demanding working conditions, higher slot fill factors and high-efficiency motors.
ExcellenceDurability with aluminium wireHigh slot fill; tested beyond 160,000 insertions with aluminium wire at a compressor manufacturer.

Send us your current blade consumption and we will tell you whether another grade lowers your cost per stator.

Bennett Premium® · For wedge pushers: A production process that makes wedge pushers more wear-resistant, notably increasing their durability.

What decides blade life

  • Wire material and diameter: aluminium and copper behave differently
  • Slot fill factor: higher fill means more friction along the blade
  • Edge and surface finish: burrs and scratches damage the enamel
  • Alignment with the stator teeth and the wedge guides
  • Insertion speed and force settings on the machine

What we need to quote

Machine make and model
Identifies the tool interface and the part family.
Drawing number, part reference or TB code
If the part was made by BENNETT, the TB code leads straight to the archived drawing.
Drawing, worn sample or photos
A photo next to a ruler is enough to start. A sample allows reverse engineering.
Stator data: number of slots, bore diameter, stack height
Defines blade and wedge guide geometry.
Wire material and diameter range
Copper and aluminium wire wear blades differently.
Quantity and current consumption
Lets us suggest the most economical grade or a stock agreement.
Problem you want to solve
Wear, wire damage, low slot fill or lead time each point to a different solution.

Machine brand names are trademarks of their respective owners. BENNETT is an independent manufacturer and is not affiliated with or authorised by these companies. Brand names are used only to describe compatibility.

Test us with one part.

Send a photo or a drawing of the part. We reply in less than 24 hours.